Safety is of utmost importance for us. This is the reason why we only offer you equipment, solutions or machines certified to the latest applicable regulations and standards.

• PPE Directive 2016/425
   
  This European Directive specifies the essential requirements which Personal Protective Equipments (PPE) must comply before being placed on the market.

 

• EN1808:2015
   
  EN 1808 is a European Standard which specifies the safety requirements for Suspended Access Equipment

 

• EN353-1:2014
   
  This European Standard defines the technical requirements for vertical rigid anchor line, whether it is attached to ladders, rungs or fixed to structures.

 

• CEN/TS16415:2013
   
  This technical specification certifies multi-user devices – that is, anchor devices that allow more than one user to be attached at the same time. It is always applied in combination with a product certified according to the EN795:2012.

 

• EN795:2012
   
  EN 795 defines the technical requirements for anchor devices. This standard indicates which loads horizontal fall arrest solutions must withstand and how they are to be tested and certified. EN 795 distinguishes five types of anchorage device, from A to E. This standard does not consider multi-user applications.

 

• EN813:2009
   
  This European Standard specifies technical requirements for sit harnesses with a low point of attachment. Sit harnesses can be used in restraint, work positioning and rope access systems.

 

• 2006/EC/42:2006
   
  This European Directive specifies the safety features for machinery. The Annex IV concerns lifting equipment. All height access machines of FAS-Tech are certified according to the directive 2006/EC/42.

 

• EN362:2005
   
  This European Standard specifies requirements for personal protective equipment against falls from a height such as connectors.

 

• EN365:2005
   
  This European Standard describes general requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging for personal protective equipment against falls from a height

 

• EN361:2003
   
  This European Standard describes the technical requirements for full body harnesses.

 

• EN358:2003
   
  This European Standard applies to belts and lanyards intended for the purpose of work positioning or restraint. Positioning lanyards are available when the user works in restraint.

 

• EN360:2002
   
  This European Standard specifies the technical requirements for retractable type fall arresters.